Model 2RYDDP(ch)-LP
Hi VHF panel antenna used in low power applications, up to 500 watts input or less.
Click here for specifications. |
 |
Model 2RYSDP(ch)-HP
Lo VHF single dipole panel antenna. Also used in high power applications up to 2kW input.
Click here for specifications. |
|
Model RYFD(ch)-LP
Double folded dipole for maximum radiation in a purely Omni-directional pattern. Hi VHF, Lo VHF and FM designs available, up to 500w input.
Click here for specifications. |
 |
|
Model SDCP(ch)
Circularly polarized FM broadcast antenna produces a minimum VSWR on the channel in use while maintaining true circularity.
Click here for specifications. |
|
Model FM-VDP
FM single dipole antenna, vertically polarized. Also used in high power applications, max 5kW input.
Click here for specifications. |
|
Model 2RYDDP(ch)-HP
Double dipole FM panel antenna, used primarily in high power applications. Tuning balun is interior and weather protected, with a single take-off point (connector) for convenience.
Click here for specifications. |
 |
Model RYFD(ch)
Double folded dipole for maximum radiation in a purely Omni-directional pattern. Typical input is up to 500w, however, higher input levels available upon request.
Click here for specifications. |
|
Model 3RYDDP(ch)-HP
Hi VHF and FM panel antenna. Three element design allows greater directivity and gain over two-dipole design panels. Used in high input power applications.
Click here for specifications. |
|
|
Model PAM(ch)UHP-LP
UHF panel antenna used in low power repeater applications and medium power applications. Red safety color optional, used to comply with local safety reg's if needed on side-mount or top-mount tower installations.
Click here for specifications. |
|
Model PAM(ch)UHP-HP
UHF panel antenna used in high power repeater applications and high power DTV applications. Typical input levels up to 2kW per antenna, however, higher input levels can be manufactured. Red safety color optional.
Click here for specifications. |
|
|
Model VP-700 Sectoral Panel Antenna
This is a new line of Fixed Wireless Antennas for full duplex high speed voice, data, and VoIP transmission in the recently allocated 698 - 806 MHz band. Like all of our products, these antennas are extremely efficient with high gains and low VSWR. Typical VSWR is less than 1.10 throughout the desired band and less than 1.05 on frequency to allow maximum throughput and to minimize latency due to high Bit Error Rates.
The panels include custom mounting brackets to enable sectoral coverage of 60, 90, and 120 degrees. The mounting brackets are manufactured in plant out of steel and are 'hot-dipped' galvanized for weather protection. The mounting hardware allows quick and easy installation of the panels, as they are marked for the three coverage options. The simplicity built into the mounts removes the possibility of installation error, such as phase cancellation, due to the improper placement of the individual panels; a common occurrence at multiple antenna installation locations.
Click here for specifications. |
|
|
Although the results are accurate, we recommend using these calculators as a guide only.
• Wavelength distance
• Antenna gain required
• Effective Radiated Power (ERP)
• Power & Voltage Ratios
• dB to Wattage & Wattage to dB conversions
• dB to Voltage & Voltage to dB conversions
• VSWR / Forward & Reflected Power
• Vertical null distance & intensity
• Transmission Line "masking" effect on VSWR
• Transmission line efficiency & connector power ratings
|
|
|
|
|
|
